Nautical Liquid Glass® Polish/Finish
16 oz. Nautical Liquid Glass Polish/Finish
(Suggested Retail Price $23.95)
Nautical Liquid Glass® Polish/Finish
16 oz. Nautical Liquid Glass Polish/Finish
(Suggested Retail Price $23.95)
Nautical Liquid Glass is non-abrasive and can be used on any fiberglass, metal, or wood boat without fear of scratching or hazing. It will not harm or remove gel or clear coat. In fact, there is no need to paint your boat's hull if it is protected by Nautical Liquid Glass! It retards barnacles, algae, and salt water erosion while reducing friction. Try it on your boat hull, as well as any other non-porous surface you wish to protect, e.g. chrome, brass, stainless steel, etc. of props, rudders, and motors. For Application Instructions, CLICK HERE. For MSDS Sheets, CLICK HERE.
Nautical Liquid Glass Polish/Finish Application Instructions
Before using, shake can well! The surface must be clean and dry. All wax residue on surface should be removed. We recommend the use of Liquid Glass Pre-Cleaner. Our Pre- Cleaner will ensure optimum results by prepping/cleaning dull, stained, oxidized, or previously waxed surfaces, thus enabling the Nautical Liquid Glass Polish/Finish to adhere better to the applied surface.
Apply Nautical Liquid Glass sparingly, but evenly, using a coarse cotton cloth in a straight back and forth movement. Apply one section at a time. The ideal applied surface temperature should be between 50 and 80 degrees. (If any paint color appears on the cloth, it is oxidized paint that must be removed to reveal the good paint layer beneath.) After a haze appears on the surface, wipe off with a clean, dry cloth. Terry cloth or Turkish towel may be used.
For best results, allow at least four hours between coats to permit "curing." When finished, "baking" boat in the sun will bond Nautical Liquid Glass Polish/Finish to the surface. The greater the number of coats, the greater the protection afforded. Liquid Glass Wash Concentrate can be used to remove debris and refreshen between coats.
Occasionally on dark colored surfaces, streaking may occur. Temperature, previously used wax products, and buffing cloths are all things that can affect streaking. Streaks can be eliminated by rebuffing the surface with a damp cloth.
Nautical Liquid Glass Polish/Finish can be applied to any nonporous surface including aluminum, stainless steel, brass, glass, ceramic tile, etc. There are thousands of uses for business or in the home. Caution should be used, however, since a long-lasting slippery finish can be dangerous in places (for example, bath tub or shower floor). Do not use on porous surfaces such as fabrics, upholstery, leather, vinyl, etc. UNDER NO CIRCUMSTANCES SHOULD NAUTICAL LIQUID GLASS BE APPLIED TO SURFACES WHERE SOLID FOOTING AND TRACTION ARE REQUIRED.
FOR REPAINTING ONLY: Liquid Glass may be removed by first washing with a strong solution of high quality car wash detergent, then using 00 steel wool with mineral spirits or Varsol. (This same procedure should be used to remove any wax product from a vehicle before repainting.) Wipe dry and sand with desired grade of sandpaper before repainting.
[ HOME | PRODUCTS | PRICES | CONTACT | FAQ | RETAILERS | LINKS | AUTO CHIC CAR COVERS ]
Questions? Comments? Suggestions? Send e-mail to or call toll-free 1-866-866-8181.
 |
© 1999-2008 Liquid Glass Enterprises, Inc. All rights reserved. Liquid Glass and Connoisseur's Choice are registered trademarks of Liquid Glass Enterprises, Inc. |
