Liquid Glass® Frequently Asked Questions

Q. Is Liquid Glass Polish/Finish safe for use on new car finishes with clear coat paint?

A. Yes. Liquid Glass Polish/Finish contains no abrasives or cleaners, and is perfectly safe for all paint finishes including clear coat. In fact, many new and used car dealers coat their vehicles with Liquid Glass Polish/Finish before they are placed on the showroom floor.

Back to top of page

Q. Is Liquid Glass Pre-Cleaner safe for use on new car finishes with clear coat paint?

A. Yes. Pre-Cleaner cleans chemically with micro-fine abrasives that are designed for clear coat finishes. They will not scratch the paint surface. Pre-Cleaner will remove minor scuffs and scratches, road tar, bugs, wax, and light oxidation.

Back to top of page

Q. Should Pre-Cleaner be used on a new car before applying Liquid Glass Polish/Finish?

A. Yes. Pre-Cleaner should always be used before the initial coat of Liquid Glass Polish/Finish. Even new cars will have some type of wax or dealer preparation product on them before the car is delivered. Removing everything from the paint surface will ensure good adhesion of Liquid Glass Polish/Finish with a minimum of streaking.

Back to top of page

Q. If I use Liquid Glass Polish/Finish, will I need to apply a wax over it?

A. No. A wax product will not add luster or improve protection. For additional luster and protection simply apply additional coats of Liquid Glass Polish/Finish. The more coats applied, the deeper and richer the gloss. The protection will also improve. For example, many coats have been known to increase the resistance to stone chips.

Back to top of page

Q. How often should I apply Liquid Glass Polish/Finish?

A. Liquid Glass Polish/Finish cannot be overused. The more coats applied the better the protection. In extreme weather conditions (e.g. snow, heavy rain, high heat, etc.) Liquid Glass Polish/Finish should be applied a minimum of every 6-12 months. Applying Liquid Glass Polish/Finish more often will help build added protection.

Back to top of page

Q. How often should I apply Liquid Glass Pre-Cleaner?

A. After the initial application of Liquid Glass Polish/Finish, Pre-Cleaner need only be applied to the full vehicle once per year to remove road film and minor impurities from the paint surface. It can also be used for spot cleaning of bird droppings, road tar, etc.

Back to top of page

Q. How many coats of Liquid Glass Polish/Finish should I apply?

A. You can apply as many as you would like without fear of overuse. Multiple coats provide a deeper, richer gloss, and an even more slippery, smooth finish.

Back to top of page

Q. How do I remove Liquid Glass Polish/Finish?

A. For purposes of applying another brand wax product, a good quality pre-wax cleaner will remove Liquid Glass Polish/Finish. For repainting, Varsol or mineral spirits should be used with steel wool.

Back to top of page

Q. Will Liquid Glass Polish/Finish protect glass?

A. Yes. Liquid Glass Polish/Finish will protect any nonporous surface including glass. It can be used on the windshield, and will dramatically decrease the need for wiper blades.

Back to top of page

Q. Will Liquid Glass Polish/Finish repair a scratched windshield or glass?

A. No. Liquid Glass Polish/Finish is used to protect. It will not repair a surface.

Back to top of page

Q. Will Liquid Glass Polish/Finish restore heavily oxidized paint or gel coat?

A. No. Liquid Glass Polish/Finish is used to protect a nonporous surface. It will not remove oxidation or restore much color to a heavily oxidized surface.

Back to top of page

Q. Can Liquid Glass Polish/Finish be applied and removed with an orbital buffer?

A. Yes, an orbital buffer can be used to apply or remove Liquid Glass Polish/Finish. However, since Liquid Glass Polish/Finish is so easy to use, we recommend application and removal by hand. Customers often ruin good paint finishes because they are not skilled in the use of an orbital buffer. Should you choose to use one, please seek instruction from a detailing or body shop professional.

Back to top of page